Wharfedale PRO EVP-X15PM
400 watt wedge that I’m bundling with a 14ft (4.5 metres) power lead.
It’s in superb condition, home use only with a bit of dust thrown in free. On one side the carpeting has a line in it where it doesn’t quite meet but this is only cosmetic – see pics. Barely even noticeable.
CASH AND COLLECT from TW8 0JQ. RRP is around £300
Key Features
90 x 60 Elliptical Wave Guide Horn with 1.75& inch (44mm) titanium diaphragm driver
High power handling, high efficiency
ProTech™ Driver
5 Band Graphic EQ
XLR / Jack Combi Input
XLR Output
Powered output for additional passive monitor
Durable black carpet covering
Delivering everything that made the EVP-X Series a best seller, the EVP-X15PM is built for the stage, with even more convenience. Complete with the same pro-tech drivers, elliptical waveguide horn technology and of course, tonnes of power the EVP-X15PM is also powered, without the need for an amplifier. Specially developed for on-stage monitoring, the amplifier module includes a 5-band EQ and a seperate amplified output to connect to an additional stage monitor such as the EVP-X15M
The power amplifier section of the EVP-XP series uses Class A/B topology and is designed to integrate seamlessly, giving the optimum smooth performance across the range. The EVP-X15PM model contains the higher rated 400W continuous / 600W peak amplifier.
Dynamic / AGC protection circuitry provides extreme protection at both the driver and the amplifier stage so the EVP-XPM can be played at maximum levels over long periods without fear of system failure. The Green LED on the front of the EVP-XPM illuminates when the AGC is activated, similar to the orange LED on the front of the amplifier.
The EVP-X15PM features a 5 band graphic equaliser accessible on the side of the unit. This allows the user more control over feedback and unwanted noise when monitoring. There’s the added benefit of a ‘Speaker Out’ output which allows the user to add on or to ‘daisy chain a passive EVP-X12M / 15M into the system directly from the EVP-X15PM.
SPECIFICATIONS
Configuration 2-way Bi-Amplified
Low Frequency Transducer 15 inch
High Frequency Transducer 1.75 inch Titanium Compression Driver
Frequency Response 50Hz – 20kHz
Power (RMS/Peak) 300W / 500W
EQ 5-Band
Enclosure Finish Black Carpet
Input 1 x XLR Jack / Combi
Output 1 x XLR, 1 x 6.3mm Jack (Powered output)
Protection Dynamic / AGC protection circuitry
Dimensions (H x W x D) 675mm X 445mm X 473.5mm
Net Weight 27.4kg
Gross Weight 30.5kg
Electro Drum Shop 